De lage Kabel van de Macht van het Voltage boven Lucht Gebundelde

Low Voltage Overhead Aerial Bundled Power Cable
1. Aerial Bundle Cable
2. XLPE/PE insulation, Aluminum Conductor
3. Mainly used for overhead applications such as street lighting.
Aerial bounded cable duplex service drop-aluminum conductor

1, Application

To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volt or lower at a conductor temperature of 75° C maximum.

2, Construction

Concentric strand or compressed 1350-H19 conductor, polyethylene insulation, concentric strand AAC, ACSR, or 6201alloy neutral messenger.

3, Standards:

ASTM B-230, B-231, B-232 and B-399 ICEA S-76-474

4, Note

Designated sizes are ACSR6/1 diameter equivalent resistivity per ASTM-B-399 for 6201.

Conductor temperature of 75° C; Ambient temperatures of 40° C; Emissivity 0.9; 2ft. /sec. Wind in sun.

Packaging: Available in 500ft coils and in long lengths on reels.

The data is approximate and subject to normal manufacture tolerances.

To determine current capacity by conductor size, please consult The National Electric Code, latest edition.

Aerial bundled cable triplex service drop-aluminum conductor

1, application

To supply power from the utility’s lines to the consumer’s weather head. For service at 600 volt or less(phase to phase) at a conductor temperature of 75° C maximum for polyethylene insulation or 90° C maximum for cross-linked insulation.

2, construction

Concentric strand or compressed 1350-H19 conductor, polyethylene or cross-linked polyethylene insulation, concentric strand AAC, ACSR or 6210 alloy neutral messenger.

3, standards

ASTM B-230, B231, B232 and B399 ICEA s-76-474

Aerial bundled cable QUADRUPLEX SERVICE DROP-ALUMINUM CONDUCTOR

1, Application

Used to supply 3 phase power, usually from a polenounted transformer, to the user’s service head where connection to the service entrance cable is made. To be used at voltages of 600 volts or less phase and at conductor temperatures not to exceed 75° C for polyethylene insulated conductors or 90° C for cross-linked polyethylene(XLPE) insulated conductors.

2, construction

Conductors are concentrically stranded, compressed 1350-H19 aluminum. Insulated with either polyethylene or XLPE cross-linked polyethylene. Neutral messengers are concentrically stranded 6201, AAC, or ACSR. One conductor is manufactured with an extruded ridge for phase identification.

3, specifications

Quadruples service drop cable meets or exceeds the following ASTM specifications:

B-230 Aluminum Wire, 1350-H19 for electrical Purposes.

B-231 Aluminum Conductors, Concentric-Lay-Stranded/

B-232 Aluminum Conductors, Concentric-lay-stranded, Coated Steel Reinforced(ACSR

B-399 Concentric-Lay-Stranded, 6201-T81 Aluminum.

Service drop cable meets or exceeds all applicable requirement of ICEA S-79-474.

4, Note

Designated size are: ACSR 6/1 diameter equivalent and AAC with equivalent resistivity per ASTM B-399 for 6201.

Conductor temperature of 90° C for XLPE, 75° C for Poly, ambient temperatures of 40° C; Emissivity 0.9; 2ft. /sec. Wind in sun.

To determine current capacity by conductor size, please consult The Electric Code, latest edition.