Primary Ud Cable, 15 Kv, Al/Tr-XLPE/Neutral/LLDPE (AEIC CS 8/ICEA S-94-649)

 Primary Ud Cable, 15 Kv, Al/Tr-XLPE/Neutral/LLDPE (AEIC CS 8/ICEA S-94-649)

Product Detail

Basic Info

Model No:Primary UD Cable
Toepassing: Ondergronds
Voltage: Laag-en middenspanning Kabel
Stroom: DC-kabel
Isolatiemateriaal: XLPE
Materiaal Vorm: Ronde Wire
Certificaat: ISO , CCC

Extra Informatie.

Handelsmerk:DingAn or OEM
Verpakking:Heated Steel-Wooden Drum/Steel Drum
Standaard:SGS
Oorsprong:Jiangsu Yixing, China
Gs-Code:8544601200
Productiecapaciteit:12000 Km/Year

Beschrijving

Primary UD Cable, 15 KV, AL/TR-XLPE/Neutral/LLDPE (AEIC CS 8/ICEA S-94-649)
Applications:
Predominantly used for primary underground distribution; Suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 15, 000 volts or less and at conductor temperatures not to exceed 90° C for normal operation.
Specifications:
Primary UD Cable meets or exceeds the following ASTM specifications:
B-3 Soft Annealed Copper Wire.
B-8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft.
B-230 Aluminum, 1350-H19 Wire for Electrical Purposes.
B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
B-609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes.
Primary UD Cable is manufactured to the latest edition of the following specifications, and in case of specification conflicts, in the order listed:
ANSI/ICEA S-94-649
AEIC CS-8
RUS U-1
Construction:
The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy. The cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield. Conductors are available with either 100% or 133% insulation levels. A concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield. The cable is identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket. A semi-conducting polyethylene jacket is available upon request.
Maximum Conductor Normal Operation: – 90O C;
Emergency Overload: – 130O C
Temperatures: Short Circuit – 250 C
Application: Medium voltage power cable for single phase underground distribution (UD), including getaway systems in low profile substations.

1/3 Neutral Full Neutral
Size AWG or kcmil Number of Strands Nominal OD Over Insulation in Number of Wires Size AWG Jacket Thickness mil Approximate Outside Diameter in Approximate Net Weight lb/kft Size AWG or kcmil Number of Strands Nominal OD Over Insulation in Number of Wires Size AWG Jacket Thickness mil Approximate Outside Diameter in Approximate Net Weight lb/kft
Aluminum 100% Insulation Level (175 mil)
2 1 0.65 6 14 50 0.95 407 2 1 0.65 10 14 50 0.95 455
2 7 0.67 6 14 50 0.98 424 2 7 0.67 10 14 50 0.98 472
1 19 0.71 6 14 50 1.02 457 1 19 0.71 13 14 50 1.02 541
1/0 1 0.72 6 14 50 1.02 473 1/0 1 0.72 16 14 50 1.02 594
1/0 19 0.75 6 14 50 1.06 496 1/0 19 0.75 16 14 50 1.06 617
2/0 19 0.80 7 14 50 1.10 555 2/0 19 0.80 20 14 50 1.10 712
3/0 19 0.85 9 14 50 1.15 636 2/0 19 0.80 13 12 50 1.13 744
4/0 19 0.90 11 14 50 1.21 729 3/0 19 0.85 25 14 50 1.15 829
250 37 0.96 13 14 50 1.26 815 3/0 19 0.85 16 12 50 1.18 859
350 37 1.06 18 14 50 1.39 1042 4/0 19 0.90 32 14 50 1.21 982
350 37 1.06 11 12 50 1.42 1066 4/0 19 0.90 20 12 50 1.24 1006
500 37 1.19 25 14 50 1.52 1331 4/0 19 0.90 13 10 50 1.28 1052
500 37 1.19 16 12 50 1.55 1368 250 37 0.96 25 12 50 1.30 1164
750 61 1.40 24 12 80 1.82 1945 250 37 0.96 16 10 50 1.34 1208
750 61 1.40 15 10 80 1.86 1992 350 37 1.06 32 12 50 1.42 1468
1000 61 1.54 31 12 80 2.00 2446 350 37 1.06 20 10 50 1.46 1503
1000 61 1.54 20 10 80 2.04 2516 350 37 1.06 16 9 50 1.49 1532
500 37 1.19 29 10 50 1.59 1988
750 61 1.40 28 8 80 1.91 2956
1000 61 1.54 37 8 80 2.09 3770
Aluminum 133% Insulation Level (220 mil)
2 1 0.74 6 14 50 1.04 465 2 1 0.74 10 14 50 1.04 513
2 7 0.76 6 14 50 1.07 483 2 7 0.76 10 14 50 1.07 531
1 19 0.80 6 14 50 1.11 519 1 19 0.80 13 14 50 1.11 603
1/0 1 0.81 6 14 50 1.11 535 1/0 1 0.81 16 14 50 1.11 655
1/0 19 0.84 6 14 50 1.15 560 1/0 19 0.84 16 14 50 1.15 681
2/0 19 0.89 7 14 50 1.19 622 2/0 19 0.89 20 14 50 1.19 779
3/0 19 0.94 9 14 50 1.24 705 2/0 19 0.89 13 12 50 1.22 812
4/0 19 0.99 11 14 50 1.30 801 3/0 19 0.94 25 14 50 1.24 898
250 37 1.05 13 14 50 1.38 914 3/0 19 0.94 16 12 50 1.27 930
350 37 1.15 18 14 50 1.48 1125 4/0 19 0.99 32 14 50 1.30 1055
500 37 1.28 25 14 50 1.61 1421 4/0 19 0.99 20 12 50 1.33 1080
500 37 1.28 16 12 80 1.70 1528 4/0 19 0.99 13 10 50 1.37 1129
750 61 1.49 24 12 80 1.91 2053 250 37 1.05 25 12 50 1.41 1266
750 61 1.49 15 10 80 1.95 2102 250 37 1.05 16 10 50 1.45 1313
1000 61 1.64 31 12 80 2.09 2565 350 37 1.15 32 12 50 1.51 1553
1000 61 1.64 20 10 80 2.13 2637 350 37 1.15 20 10 50 1.55 1591
1000 61 1.64 16 9 80 2.16 2676 350 37 1.15 16 9 50 1.58 1620
500 37 1.28 29 10 80 1.75 2152
750 61 1.49 28 8 80 2.01 3069
1000 61 1.64 37 8 80 2.18 3894

Tags: , , , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.